Are things getting closer to being done? I think the end is in sight but the extra costs are mounting and I can feel that it’s going to take some real fortitude to get through these last few months. Not sure how to better explain, but at this point we just keep moving forward and hope for the best.
We got the fire pit back from powder coating and got it placed. I have the burner and rocks and stuff for inside but just can’t find time to get it all installed.
We made the decision to upgrade the hvac in the house as part of this whole process, so this week they started installing mini-split systems on both floors. The original system was quite old, noisy and very inefficient.
Setting the compressor for the house mini-splits on the roof above the new lobby.
Sheetrock in the lobby is nearly finished and ready for paint.
Lots of sheetrock sanding this week. Despite our best efforts the dust is everywhere, not just in the new building but in the house as well. Looking forward to this phase being complete.
Sheetrock ready for paint in the hallway.
The Muta hangers finally arrived from Kinetics Noise Control. These isolators are what the ceilings in the studios will hang from.
Starting to install the Muta hangers in tracking room 1. After figuring things out the guys moved pretty quickly.
The grid set up and suspended in tracking room 1. Three layers of 5/8” sheetrock will be screwed to this grid forming the ceiling of the studio.
Tracking room 1.
The crew started by hanging tracking room 1 as it was a rectangle and level, now they are moving on to control room 1 which is a sloped ceiling and not quite so full of right angles.
Setting the grid around the hvac has proved to be a bit of a hassle for the guys.